THE HACKER'S UTILITY KIT
      
                                programmed by:
                           Mike Howard / Joe Peter
                         Paul Rowe / Jeff Spangenberg
                          Designed by: Les Lawrence
                               (C)1987 K.J.P.B.
      
         Welcome to The Hacker's Utility Kit. This program represents the
      finest set of disk examination and manipulation tools ever
      assembled into one package. We are confident you will find it to be
      one of the most useful disks in your library. Each and every module
      included in this package has been put through it's paces in real
      use. We feel you'll find them not only extremely powerful, but also
      user friendly. Many extras have been put into The Hacker's Utility
      Kit. Please be sure to read each segment of this manual before
      using any of the tools. This will insure that you obtain full use
      of each and every feature. Before we get on to the goodies, we want
      to thank the programers listed above for their efforts in writing
      this package. We are very proud to present their finest effort
      ever. They, just like you, are "Hackers" at heart. This program is
      a showcase of their real talent.
      
                             Loading Instructions
      
      Place the Utility disk in your disk drive, reverse side up. Type
      < LOAD"*",8,1 > and hit RETURN. In a short time, the menu will
      appear. Use the cursor U/D key to move the hand-pointer to the
      desired feature. Press RETURN and that utility will automatically
      load in and self start. We'll discuss each utility in it's order
      of display on the menu.
      
                        Sector Usage and Error Scanner
      
      Selecting input 1 from the main menu will automatically boot this
      utility. When the menu appears, you may make your selection using
      the cursor or number keys to position the arrow pointer. Press
      RETURN to activate your choice.
      
      1. Scan Disk:
      
         P : Print output after scan (use standard Commodore printer).
         S : Begin scan.
         E : Exit to beginning menu.
         M : Modify range of tracks to scan. Defaults are 1-38.
      
      The following characters are used in the scan to represent the
      condition of any scanned diskette.
      
         S : Sync track (1 sync, no data).
      
            K.J. REVEALED TRILOGY    PAGE [149]    (C)1990 K.J.P.B.

<<previous page - next page>>